Shower Caddy Corner Organizer for Bathroom, Rustproof Stainless Design, 4 Large shower shelves and 2 Small Basket for Storage, Adjustable Height Tension Pole Extend from 23.6 to 114.5 Inch (Black)

Product Description

Note:

At present, we have optimized the product manual, and a small number of early product inventory installation manuals are still old versions. We suggest that you download the latest installation manual from the “Product guides and documents module” on this page to help you assemble more easily.

Q&A

1, How to keep the shelves on the pole during assembly? They seem to shake easily during installation.

There is another installation method. First, You can string the required shelves onto the assembled poles, as they may naturally pile up on the poles. And you don’t need to fix the shelves for now. Then you fix the assembled pole where it needs to be used, adjust the height of the pole to make it secure. And finally you can proceed with the fixing work for the shelves, move the shelves to the appropriate height on the pole for fixing work.

2, How to firmly install shelves?

First, move the shelves onto the pole to the position where it needs to be fixed, use the rubber piece, pay attention to the arrow direction facing upwards, and then insert it into the joint between the circular hole of the shelves and the pole, which can make the shelf stable.

3, How to firmly install the pole between the ceiling and the ground?

We suggest that the assembled height be 1 inch higher than the actual required height. This can make the spring pole work better.

4, What if the assembled poles is too high or too short?

If the assembled poles is too high, you can reduce the telescopic height between the top spring pole A and the adjacent standard pole D by adjusting it. You can recall that the top spring pole A and the connected pole D are combined by rotation, and you reverse torsion them to loosen them. Since the bottom diameter of the top spring pole is smaller than the connected pole D, you can adjust the combination height of spring pole A and pole D, shorten it to the actual required height, and then rotate and tighten it again.

If the assembled poles is not high enough, you can flexibly add standard pole D or shorter pole C. If the assembled poles is too high after adding, you can refer to the above suggestions and adjust and shorten the combined height of spring pole A and pole D.

Large Capacity and Sturdy

Compared to others, we use larger diameter stainless steel pipes, more solid than others, and use specialized rubber wedges to securely secure the shelves.

Rustproof Stainless

This Shower Caddy uses high-quality non-magnetic stainless steel for both poles and basket, and is covered with waterproof coating, which makes its rust resistance very strong and can be used for many years.

Detachable Soap and Toothbrush Holder

In order to improve space utilization, we also designed detachable toothbrush holders and soap holders.

Built in Towel Bar

We have built-in towels on 2 of the 4 large shelves.

Built-in hook

All 4 large shelves have built-in hooks.

Storage hooks for razor , loofah & brush.

Silicone anti slip foot cap

Silicone anti slip foot cap at both ends of the head and tail.

RUSTPROOF STAINLESS – Bilibompa shower caddy corner is fully made of stainless steel (NON MAGNETIC) for all poles and baskets, which made it durable and withstand rustproof for years.
STABLE & SECURE – This shower organizer used larger pole than others and it is more solid than others, very strong and sturdy once located in place.
4+2 SPACE DESIGN GIVES YOU MORE – We offer 4 large shelf organizers (2 of which have built-in towel bars), as well as 2 detachable shelf organizers (including 1 toothbrush holder and 1 soap holder). In addition, the four large shelf organizers all have built-in hooks and storage space for shavers, meet all your placement needs. Compared to traditional fan-shaped design shelves, the square storage space has increased by at least 20%. And the design of the wire basket allows items to dry faster.
HEIGHT ADJUSTABLE DESIGN – This tension shelf fit most showers, not for drop or slope ceiling. This package is equipped with 8 detachable rods, which can be flexibly increased or decreased according to needs 【The installation manual for a small portion of the inventory is an old version. To make it easier for you to install, please download the latest installation manual from the Product guides and documents module on the page】.
ASSEMBLY & 100% SATISFACTION – Our shower caddy comes with labeled pieces for you to distinguish parts and It takes you around 20 minutes to assemble. Each accessories are sealed with separated bags to prevent from scratch. Shower pole caddy is easy to assemble and install with no drilling, non-marring rubber end caps provide extra stability, no damage to your shower walls or ceiling; We committed to providing excellent products and 100% satisfactory pre-sale and after-sale services.